Hobby Components SmartLCD...
The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122). When constructed this add-on board connects to the SmartLCD's keypad header using a single 4 way cable (supplied). Once connected it adds the additional features of keypad control (up, down, left, right, select, and back) and audible output to your end application.
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122). When constructed this add-on board connects to the SmartLCD's keypad header using a single 4 way cable (supplied). Once connected it adds the additional features of keypad control (up, down, left, right, select, and back) and audible output to your end application.
Access to button states and speaker output is then available via the SmartLCD's I2C or UART interfaces using its built-in commands (See the SmartLCDs manual for more information)
Features:
Product code: HCKITS0058
Connects to the SmartLCD to add keypad input and speaker output to your application - no additional pins required
Control of keypad and speaker is done through existing SmartLCD serial commands.
Adds UP, DOWN, LEFT, RIGHT, SELECT, and BACK keypad control.
Easy to solder through-hole components.
Designed to allow panel mounting.
Dimensions:
Full Build guide is available on our support forum here.
The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...
The Hobby Components logic analyser can capture up to 16 separate channels of 3.3V or 5V logic...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
This prototyping/programming board is designed for use with the Atmel ATMega48P, ATMega168P,...
This is the latest Revision 3 PCB which allows you to simplify your build of a DIY EDTracker -...
The mLink port expander is a serial (I2C/IIC) digital I/O module. It allows you to add 12...
Our very own version of the popular Arduino Mega development board (HCARDU0092). It hast been...
The SmartRFy digital Rx module provides a set of 4 digital output pins which can be remotely...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric LCD...
The Hobby Components prototyping shield for the Arduino Mega allows you to add your own custom...
We've partnered up with the fabulous guys over at EDTracker to bring to you the EDTracker...
The mLink L9110 motor controller is a serial (I2C) 2 channel DC motor driver that is capable...