Issues with Yodel
Due to current issues with Yodel, any orders placed
with Yodel selected will be shipped by Evri for the time being.
Hobby Components 4x4x4 64 LED cube kit (Available in various colours)
LED light cubes are a hugely popular and fun project and with this kit you will have all the parts to build your very own. Building on the popular 8x8x8 cube kit (HCKITS0022), we decided to create an easy to build through-hole version for those of you who are better suited to this kind of soldering. The kit includes all the components necessary to build the Arduino compatible driver base...
LED light cubes are a hugely popular and fun project and with this kit you will have all the parts to build your very own. Building on the popular 8x8x8 cube kit (HCKITS0022), we decided to create an easy to build through-hole version for those of you who are better suited to this kind of soldering. The kit includes all the components necessary to build the Arduino compatible driver base board and 64 3mm LEDS to build a 4 x 4 x 4 cube.
The kit is available with 4 different LED colour versions, please select your colour in the menu to the right:
64 x 3mm BLUE LEDs (HCKITS0041)
64 x 3mm GREEN LEDs (HCKITS0042)
64 x 3mm RED LEDs (HCKITS0043)
64 x 3mm WHITE LEDs (HCKITS0044)
We have also now added options for the same cubes but with a white PCB base (instead of the standard black).
Blue LEDS on White PCB (HCKITS0053)
Green LEDs on White PCB (HCKITS0054)
Red LEDs on White PCB (HCKITS0055)
White LEDs on White PCB (HCKITS0056)
The kit also comes preloaded with several demo patterns so once constructed simply connect the cable and your cube will immediately jump into life. But the fun doesn't have to stop there. If you like to tinker the kit is compatible with the Arduino development environment and we have also created an Arduino library which is available for download from the software section of our support forum. This library makes it as easy as possible to create your own LED cube sketches and add your own patterns.
What you get in the kit:
4x4x4 Cube PCB
64 x LEDs (kits available in blue, red, white)
16 x 100ohm Resistors
4 x 220ohm Resistors
1 x 10K Resistor
1 x Tact Switch
4 x White 5mm LEDs
3 x 100nF Capacitors
2x 20pF Capacitors
1x ATMega328 IC
1x 16MHz Crystal
1x ULN2003 IC
One of the following:
64 x 3mm BLUE LEDs (HCKITS0041)
64 x 3mm GREEN LEDs (HCKITS0042)
64 x 3mm RED LEDs (HCKITS0043)
64 x 3mm WHITE LEDs (HCKITS0044)
Plus: A USB to serial interface cable that can be used to power and reprogram the completed cube.
Please note that some familiarity in soldering is recommended to construct this kit. A soldering iron, solder and some tools will also be required.
A full build guide is available on our blog here.
Specific References
16 other products in the category
mLink Transreflective 1602...
The mLink Character LCD series consists of serial (I2C/IIC) displays available in two sizes:...
mLink WS2812 RGB LED...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
- Currently Out of Stock
Hobby Components Arduino...
LED light cubes are a hugely popular and fun project. With this kit (HCKITS0050) you will have...
SmartRFy Sensor Module
The SmartRFy sensor module adds the option to remotely monitor various sensors via a SmartRFy...
Hobby Components Arduino...
Building your own hardware is always fun especially when it's combined with the Arduino...
Hobby Components 1602...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric...
Hobby Components SmartLCD...
The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...
Hobby Components Protoduino...
Designed as a means to easily go from your Arduino and breadboard prototype to a more...