R16-504BD 16mm Push Button...
These switches are non-latching 4-pin switches. The button is round, mounted in a square...
These toggle switches are 3-pin versions and are latching type switches, meaning once you move the toggle, it will remain in place (latched) until you move it again.
Specification
Voltage: 6A 125V
Type:MTS-102
Pin number:3-Pin
Position: 2 (On-On)
Mounting hole:1/4"(6mm)
These toggle switches are 3-pin versions and are latching type switches, meaning once you move the toggle, it will remain in place (latched) until you move it again.
Specification
Voltage: 6A 125V
Type:MTS-102
Pin number:3-Pin
Position: 2 (On-On)
Mounting hole:1/4"(6mm)
These switches are non-latching 4-pin switches. The button is round, mounted in a square...
Available in locking and non-locking, these tact switches measure 7mm x 7mm and have a height...
These push buttons come with all necessary parts, including button, LED in holder, adapter...
Measuring approximately 6x6x4.3mm, these switches have 2 pins (if you need a 4 pin switch,...
These push buttons come with all necessary parts, including button, LED in holder, adapter...
HCSWIT0027 Non-Latching Rectangle Push Button Switch DC 12V is available in red and green.
Low-cost, miniature push-to-make switch with a round black actuator button.
Ideal...
These momentary 6mm x 6mm tact switches have 4 DIP pins and feature a long 6mm switch.
This switch is non-latching and has four pins. The button is round, mounted in a square casing...
These switches are non-latching 4-pin switches. The button is round, mounted in a square...
Available in locking and non-locking, these tact switches measure 7mm x 7mm and have a total...
These momentary on/off switches measure 27.65mm in length (including pins). The pins have a...