3 Pin Micro Switch

These switch caps are designed for use with 

Low-cost, miniature push-to-make switch with a round black actuator button.

Ideal...

These push buttons come with all necessary parts, including button, LED in holder, adapter...

Measuring approximately 6x6x4.3mm, these switches have 2 pins (if you need a 4 pin switch,...

HCSWIT0027 Non-Latching Rectangle Push Button Switch DC 12V is available in red and green.

A through-hold PCB mounted tactile push button switch measuring 12 X 12 X 4.3mm

A large resettable emergency stop button. Made from ABS plastic this button has a large 40mm...

Available in locking and non-locking, these tact switches measure 7mm x 7mm and have a height...

Arcade style 24mm (body diameter) momentary push button. Fitted with removable switch give a...

These momentary 6mm x 6mm tact switches have 4 DIP pins and feature a long 6mm switch.

This switch is non-latching and has four pins. The button is round, mounted in a square casing...

These tilt switches use a metal ball which creates the same outcome as a mercury tilt switch,...

These toggle switches are 3-pin versions and are latching type switches, meaning once you move...

These switches are non-latching 4-pin switches. The button is round, mounted in a square...

These switches are non-latching 4-pin switches. The button is round, mounted in a square...

These momentary on/off switches measure 27.65mm in length (including pins). The pins have a...