JY-MCU Bluetooth Serial...
The Hobby Components wireless Bluetooth module is intended to be used in conjunction with our...
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n wireless network. This in turn provides your microcontroller project with the ability or request data from a server anywhere in the word via a suitable WiFI connection.
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n wireless network. This in turn provides your microcontroller project with the ability or request data from a server anywhere in the word via a suitable WiFI connection. Control of the module couldn't be simpler as it comes pre-flashed with a serial application allowing it to be controlled via simple 'AT' serial (9600 baud default) commands.
Please Note: This module operates at 3.3V only. If interfacing to a 5V microcontroller level shifters should be used.
SKU: HCMODU0077
Module: ESP-12
Device: ESP8266MOD
Frequency: (ISM): 2.4GHz
Power: +25dBm
Supported Wifi: 802.11 b/g/n
Operating voltage: 3.3V
Min Current (Sleep): 10mA
Max current (connected to 802.11b network): 215mA
VCC.........3.3V
GND........0V
CH_PD.....Power down pin. Connect to 3.3V for normal operation
Additionally to configure the module to accept AT commands you should connect the following pins to GND/VCC
GPIO0......VCC (HIGH)
GPIO2......VCC (HIGH)
GPIO15....GND (LOW)
AT Commands, examples available on our support forum here.
For suitable header pins, please see this item.
The Hobby Components wireless Bluetooth module is intended to be used in conjunction with our...
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n...
- Remote control with 21 buttons
- Transmission Frequency: 38KHz;
- Launch Distance:...
This item is a wireless remote controlled module with a battery operated transmitter fob. It...
This low power transceiver module is based on the Maxim MAX485 IC to allow serial...
This relay module is designed for the ESP-01s ESP8266 module. It features a 6 pin IDC socket...
The SmartRFy USB module adds the ability to monitor and control a SmartRFy network directly...
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n...
This class 2 Bluetooth module (HC-05) comes programmed with firmware that allows it to pass...