MAX485 RS485 transceiver...
This low power transceiver module is based on the Maxim MAX485 IC to allow serial...
Our phone lines are currently down due to issues causing during the recent flooding. If you need to contact us please email sales@hobbycomponents.com
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n wireless network. This in turn provides your microcontroller project with the ability or request data from a server anywhere in the word via a suitable WiFI connection. Control of the module couldn't be simpler as it comes pre-flashed with a serial application allowing it to be controlled via...
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n wireless network. This in turn provides your microcontroller project with the ability or request data from a server anywhere in the word via a suitable WiFI connection. Control of the module couldn't be simpler as it comes pre-flashed with a serial application allowing it to be controlled via simple 'AT' serial (9600 baud default) commands.
To interface to the module a standard 0.1" pitch 8 pin header is pre-soldered proving access to power, serial, and configuration pins.
Please Note: This module operates at 3.3V only. If interfacing to a 5V microcontroller level shifters should be used.
SKU: HCMODU0085
Module: ESP-01
Device: ESP8266MOD
Frequency: (ISM): 2.4GHz
Power: +25dBm
Supported Wifi: 802.11 b/g/n
Operating voltage: 3.3V
Min Current (Sleep): 10mA
Max current (connected to 802.11b network): 215mA
This low power transceiver module is based on the Maxim MAX485 IC to allow serial...
The HC-11 433MHz Wireless Serial Port Module is based on the TI C1101 ultra low-power wireless...
This item is a wireless 4 channel remote controlled module with a battery operated transmitter...
Low cost, small, low profile 21 key infrared remote control (HCIRRC0001). The remote uses the...
The PT2272-M4 (Rx) receiver module is designed to be used in conjunction with the PT2262 (Tx)...
High quality adjustable angle antenna with integrated SMA connector. Designed for low power...
This item is a wireless remote controlled module with a battery operated transmitter fob. It...
The SmartRFy USB module adds the ability to monitor and control a SmartRFy network directly...
Cost effective, high-performance u-blox 6 based NEO-6 series of GPS modules, that brings the...
The PT2262 (Tx) transmitter module is designed to be used in conjunction with the PT2272-M4...
The TB387 high powered module (HCMODU0089) provides a means of transmitting serial data over...