4 Channel 433MHz wireless receiver with remote fob
This item is a wireless 4 channel remote controlled module with a battery operated transmitter fob. The fob has 4 individual buttons which, when pressed, will trigger one of the 4 digital output pins on the receiver module. When no buttons are pressed all 4 digital pins will remain low (0V). When one of the transmitter buttons is pressed the appropriate output pin on the receiver...
This item is a wireless 4 channel remote controlled module with a battery operated transmitter fob. The fob has 4 individual buttons which, when pressed, will trigger one of the 4 digital output pins on the receiver module. When no buttons are pressed all 4 digital pins will remain low (0V). When one of the transmitter buttons is pressed the appropriate output pin on the receiver will go high (5V) and will remain high until the button is released.
These units are based on the PT2262 & PT2272 433MHz transmitter and receiver IC which means they are compatible with our 433MHz PT2262 wireless transmitter/receiver module. See items HCMODU0048 & HCMODU0049.
The transmitter module includes a 12V 23AE alkaline battery and the receiver module can be powered by a single 5V DC supply.
Notes:
To obtain maximum receiver range an external antenna should be attached to the ANT pad on the receiver module. We recommend a length of single core wire measuring 23.8cm (1/4 wavelength) in length.
This is a short range device operating in the 433MHz spectrum. As with all wireless transmitters please make sure this device is legal to operate within your country.
Features:
Product code: HCWILS0004
Operating frequency: 433MHz
Max range: ~10 Meters in free space
Remote: Key ring fob with 4 push buttons and extendable antenna.
Remote control power: Battery operated (12V 23AE included)
Receiver: 4 Channel module capable of receiving a trigger signal from multiple transmitters (Note only one channel can be activated at any one time).
Receiver power: 5V DC via screw terminals
Receiver outputs: 5V TTL active high.
Receiver Pinout:
1) GND.......Power 0V
2) 5V..........Power +5V
3) D0.........Digital output 1 (high when button B is pressed)
4) D1.........Digital output 1 (high when button D is pressed)
5) D2.........Digital output 1 (high when button A is pressed)
6) D3.........Digital output 1 (high when button C is pressed)
7) VT.........Valid Transmission (high = valid transmission received)
PT2272 PDF available on our support forum here.
Specific References
16 other products in the category
PT2262 Wireless Transmitter...
- Currently Out of Stock
MAX485 RS485 transceiver...
This low power transceiver module is based on the Maxim MAX485 IC to allow serial...
- Currently Out of Stock
JY-MCU Bluetooth Serial...
The Hobby Components wireless Bluetooth module is intended to be used in conjunction with our...
315MHz remote controlled...
This item is a wireless remote controlled module with a battery operated transmitter fob. It...
- Currently Out of Stock
2.4GHz 3dB SMA Antenna with...
High quality adjustable angle antenna with integrated SMA connector. Designed for low power...
ESP-01S / ESP01S Relay...
This relay module is designed for the ESP-01s ESP8266 module. It features a 6 pin IDC socket...
433MHz Wireless Modules...
Low cost superheterodyne receiver and ASK transmitter. The transmitter consists of a single...
SmartRFy USB Module
The SmartRFy USB module adds the ability to monitor and control a SmartRFy network directly...
- Currently Out of Stock
Master / Slave Bluetooth...
This class 2 Bluetooth module (HC-05) comes programmed with firmware that allows it to pass...
433MHz Wireless Receiver...
Low cost superheterodyne receiver designed to be used with transmitter HCMODU0088. The...