On-board ACS712T ELC-05B current sensor; Working voltage: DC 5V; Power LED indicator; Measures positive and negative 5A current; Corresponding to the analogue output 185mV / A; Output voltage is VCC/2 when no current is measured
|
Model |
ACS712 |
|
Features |
Well built, easy operation |
|
Specification |
On-board ACS712T ELC-05B current sensor; Working voltage: DC 5V; Power LED indicator; Measures positive and negative 5A current; Corresponding to the analogue output 185mV / A; Output voltage is VCC/2 when no current is measured |
Dimensions: 1.22 in x 0.47 in x 0.43 in (3.1 cm x 1.2 cm x 1.1 cm)
Infrared receiver module uses a 1838 infrared receiver. This is a universal type, with steel,...
Optical endstop providing a contactless and reliable alternative to the mechanical...
The MAX471 module (HCSENS0041) is a complete, bidirectional, highside current-sense amplifier...
The DHT21 digital temperature sensor is one of the commonest from the range of DHT temperature...
Working voltage: 5V
Circle of Pulses: 20
Product Code: HCMODU0063
Diagrams,...
- Main chip: LM393
- Working voltage: DC 5V
- Single channel signal output
-...
A side mounted waterproof float switch (HCSENS0015) which uses a magnet embedded in the float,...
A resistive strain gauge sensor with a 350 ohm nominal resistance which varies when a force is...
This Platinum thermal resistance probe is an accurate, sensitive, and stable temperature...
A breakout board for the TCS320 colour sensor which also includes white LEDs for reflective...
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital...
This is a very low cost break out module for the ADXL335 tripple axis accelerometer. This...
The VL53L0X (HCMODU0127) is a new generation Time-of-Flight (ToF) laser-ranging module housed...
DS18B20 temperature sensor chip, waterproof, stainless steel probe, cable length: 100cm; Power...
This sensor accepts a GND and +5V supply, and has a single digital output which goes low (GND)...
On-board ACS712T ELC-05B current sensor; Working voltage: DC 5V; Power LED indicator; Measures positive and negative 5A current; Corresponding to the analogue output 185mV / A; Output voltage is VCC/2 when no current is measured
