PIR Bracket
The perfect accompaniment to our Pyroelectric Infrared PIR Motion Sensor Detector Module...
The DHT21 digital temperature sensor is one of the commonest from the range of DHT temperature sensors and boasts a relatively high temperature measurement accuracy of 0.5oC in 0.1oC steps with a relative humidity accuracy of +/- 3%. It has only 3 wires, including power and ground, meaning only one digital pin is required to interface it to a microcontroller...
The DHT21 digital temperature sensor is one of the commonest from the range of DHT temperature sensors and boasts a relatively high temperature measurement accuracy of 0.5oC in 0.1oC steps with a relative humidity accuracy of +/- 3%. It has only 3 wires, including power and ground, meaning only one digital pin is required to interface it to a microcontroller. For Arduino development platforms the sensor is very well supported by the DHT library available from the Arduino Playground website.
Specification:
Product Code: HCSENS0026
Model: AM2301
Power supply: 3.3-5V DC
Output signal: digital signal via single-bus
Sensing element: Polymer humidity capacitor
Measuring range: humidity 0-100%RH; temperature -40~80Celsius
Accuracy: humidity +-3%RH(Max +-5%RH); temperature <+-1Celsius
Resolution or sensitivity: humidity 0.1%RH; temperature 0.1Celsius
Repeatability: humidity +-1%RH; temperature +-0.2Celsius
Humidity hysteresis: +-0.3%RH
Long-term Stability: +-0.5%RH/year
Sensing period: Average: 2s
Dimensions size 59*27*13.5mm
Example Arduino Sketch, Library and Datasheet available on our support forum here.
The perfect accompaniment to our Pyroelectric Infrared PIR Motion Sensor Detector Module...
The MAX471 module (HCSENS0041) is a complete, bidirectional, highside current-sense amplifier...
This 5mW laser module emits a small intense focused beam of visible red light. The example...
A very low cost module incorporating with a very high precision 24 ADC and differential high...
This is a simple photosensitive resistance sensor module. The sensor has a digital output that...
On-board ACS712T ELC-05B current sensor; Working voltage: DC 5V; Power LED indicator; Measures...
- Photosensitive diode
- Working power: + 5V
- Working current: < 10mA
-...
This infra-red reflecting sensor module (HCSENS0016) is ideal for application were reflective...
A simple but very useful module which uses a potential divider to reduce any input
DS18B20 temperature sensor chip, waterproof, stainless steel probe, cable length: 100cm; Power...