Wired / Wireless
- Remote control with 21 buttons
- Transmission Frequency: 38KHz;
- Launch Distance: More than 8m (depending on the surrounding environment, sensitivity of receiver etc)
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n wireless network. This in turn provides your microcontroller project with the ability or request data from a server anywhere in the word via a suitable WiFI connection.
Low cost superheterodyne receiver designed to be used with transmitter HCMODU0088. The receiver has a single digital output pin that pulls high when a signal is received. The simplicity of these modules makes them ideal for applications where low power and low data rate (4Kbps) applications are required.
Transmission Distance :20-200 m (dependent on supply voltage)
Operating Voltage :3.5-12V
Dimensions: 19 * 19mm
AM transfer rate: 4Kb/s (4000 bits per second)
Transmission power: 10mW
Emission frequency: 433M
Product Code: HCMODU0088 (Receiver also available: HCMODU0087)
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n wireless network. This in turn provides your microcontroller project with the ability or request data from a server anywhere in the word via a suitable WiFI connection. Control of the module couldn't be simpler as it comes pre-flashed with a serial application allowing it to be controlled via...
The TB387 high powered module (HCMODU0089) provides a means of transmitting serial data over much greater ranges than standard RF modules such as Bluetooth. Simply connect a TTL serial interface to a transmitter and receiver module and the modules will transparently transmit your data over a 2.4GHz signal at a range of up to 400 meters. In practice we have successfully transmitted single...
High quality adjustable angle antenna with integrated SMA connector. Designed for low power 2.4GHz transceivers such as 802.11b/g, Bluetooth, and other 2.4GHz telemetry modules with suitable connector. Angle of antenna can be adjusted to a 90° right-angle.
This low power transceiver module is based on the Maxim MAX485 IC to allow serial communication over very long cable runs (up 4000 feet / 1200 meters). Serial data can be transmitted in both directions (half duplex) at a data rate up to 2.5Mbps. The modules operate from a standard 5V power...
ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. This Ethernet LAN module connects directly to most microcontrollers.
Low cost, small, low profile 21 key infrared remote control (HCIRRC0001). The remote uses the very common NEC protocol as a transmission method which will work with many types of infrared receivers including our IR receiver (HCSENS0014) and module (HCSENS0010). Used with a receiver this remote is also great for simple microcontroller and robotic projects where a remote control is required.
This item is a wireless remote controlled module with a battery operated transmitter fob. It provides a means of remotely switching a high powered device from up to 10 meters distance. The receiver module contains a relay with a set of clean contact...
This item is a wireless 4 channel remote controlled module with a battery operated transmitter fob. The fob has 4 individual buttons which, when pressed, will trigger one of the 4 digital output pins on the receiver module. When no buttons are pressed all 4 digital pins will remain low (0V). When one of the transmitter buttons is pressed the appropriate output pin on the receiver...