A linear sliding potentiometer module allowing for very smooth and precise control. The module provides two separate 10K wiper outputs taken out to standard 2.54mm header pins.
A linear sliding potentiometer module allowing for very smooth and precise control. The module provides two separate 10K wiper outputs taken out to standard 2.54mm header pins.
VCC and GND pins provide a convenient means of applying a voltage across each potentiometer. GND pins for both potentiometers are commond together whilst VCC outputs are independent so that different voltages can be applied accross each potentiometer.
The module has 4 mounting holes for panel mounting with a long wiper arm and ergonomic control knob.
Model Number: HCMODU0084
2x Analogue outputs providing 0-VCC
Resistance: 10K Ohm
Size: 91mm * 21mm
Total height: 30.5mm
Example Application:
A breakout board / module for the MPU9250 9-axis (9DOF) accelerator, gyroscope, and digital...
Compatible with DS18B20. Please note that this sensor does not support parasitic mode.
...
A side mounted waterproof float switch (HCSENS0015) which uses a magnet embedded in the float,...
The TMP102 device is a digital temperature sensor ideal for NTC/PTC thermistor replacement...
The MAX471 module (HCSENS0041) is a complete, bidirectional, highside current-sense amplifier...
DS18B20 temperature sensor chip, waterproof, stainless steel probe, cable length: 100cm; Power...
The BMP180 is the function compatible successor of the BMP085, a new generation of high...
Allows for sensing of solid objects within a fixed range (adjustable with on-board...
This bundle consists of two speed encoder photoelectric pulse output modules. The HC-020K...
The GP2Y1010AU0F / GP2Y1014AU (HCSENS0024) from Sharp is an optical air quality sensor,...
- Photosensitive diode
- Working power: + 5V
- Working current: < 10mA
-...
A linear sliding potentiometer module allowing for very smooth and precise control. The module provides two separate 10K wiper outputs taken out to standard 2.54mm header pins.
