Side Mounted Water Level /...
This water level sensor / float switch can be used to sense when a liquid has reached a set...
- On sale!
Sensor for flame wavelengths between 760 nm to 1100 nm
Model | N/A |
Quantity | 1 |
Material | PCB |
Features | Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive; Module has two outputs: 1, AO, analog output, real-time output voltage signal on the thermal resistance; 2, DO, when the temperature reaches a certain threshold, the output high and low signal threshold adjustable via potentiometer; 60 degree detection sensor |
Application | Arduino DIY project |
Other | Voltage: DC 3~5.5V |
PINOUT | |
---|---|
PIN | DESCRIPTION |
1 | Analogue out |
2 | GND |
3 | VCC (+5V) |
4 | Digital out |
Example sketch available on our support forum here.
http://forum.hobbycomponents.com/viewtopic.php?f=39&t=1201
This water level sensor / float switch can be used to sense when a liquid has reached a set...
This module has been designed as an alternative to the PIR motion detectors commonly used in...
Transmitter and receiver in one photoelectric sensor. The sensor has an adjustable detection...
The MQ-7 carbon monoxide sensor module allows for the sensing of CO concentrations in the air....
This 16 key capacitive touch keypad is based on the TTP229 capacitive sensor with accurate...
This Platinum thermal resistance probe is an accurate, sensitive, and stable temperature...
A linear sliding potentiometer module allowing for very smooth and precise control. The module...
The TSL2561 (HCARDU0102) Luminosity sensor module is a light to digital interface module. The...
The MAX471 module (HCSENS0041) is a complete, bidirectional, highside current-sense amplifier...
This is a simple photosensitive resistance sensor module. The sensor has a digital output that...