This water sensor is designed for water detection and can be widely used in sensing rainfall level, overflow level or even liquid leakages. The sensor is mainly comprised of three parts: An electronic connector, a 1 M resistor and several lines of bare conducting wires.
Description
This water sensor is designed for water detection and can be widely used in sensing rainfall level, overflow level or even liquid leakages. The sensor is mainly comprised of three parts: An electronic connector, a 1 M resistor and several lines of bare conducting wires.
This sensor works by having a series of exposed traces connected to ground and interlaced between these are the sense tracers. The sensor tracers have a weak pull-up resistor of 1 M. The resistor will pull the sensor trace value high until a drop of water shorts the sensor to the grounded trace. This module will work with the digital I/O pins of your Arduino or you can use it with the analogue pins to detect the amount of water between the grounded and sensor tracers.
This item judges the water level through a series of exposed parallel wires, which measure the amount of water present.
This item uses very little power and is highly sensitive, which are excellent characteristics of this type of module.
Pressure range :0-5 .8 psi (40kpa);
Product Features:
Solid, MEMS...
The W1209 is an incredibly low cost yet highly functional thermostat controller. With this...
This 16 key capacitive touch keypad is based on the TTP229 capacitive sensor with accurate...
This module has been designed as an alternative to the PIR motion detectors commonly used in...
A breakout board / module for the MPU9250 9-axis (9DOF) accelerator, gyroscope, and digital...
LD2410C is a high-sensitivity 24GHz human presence status sensing module developed by Hi-link....
The BMP180 is the function compatible successor of the BMP085, a new generation of high...
The DHT21 digital temperature sensor is one of the commonest from the range of DHT temperature...
Transmitter and receiver in one photoelectric sensor. The sensor has an adjustable detection...
A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module...
This water sensor is designed for water detection and can be widely used in sensing rainfall level, overflow level or even liquid leakages. The sensor is mainly comprised of three parts: An electronic connector, a 1 M resistor and several lines of bare conducting wires.
