MAX485 RS485 transceiver...
This low power transceiver module is based on the Maxim MAX485 IC to allow serial...
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n wireless network. This in turn provides your microcontroller project with the ability or request data from a server anywhere in the word via a suitable WiFI connection.
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n wireless network. This in turn provides your microcontroller project with the ability or request data from a server anywhere in the word via a suitable WiFI connection. Control of the module couldn't be simpler as it comes pre-flashed with a serial application allowing it to be controlled via simple 'AT' serial (9600 baud default) commands.
Please Note: This module operates at 3.3V only. If interfacing to a 5V microcontroller level shifters should be used.
SKU: HCMODU0077
Module: ESP-12
Device: ESP8266MOD
Frequency: (ISM): 2.4GHz
Power: +25dBm
Supported Wifi: 802.11 b/g/n
Operating voltage: 3.3V
Min Current (Sleep): 10mA
Max current (connected to 802.11b network): 215mA
VCC.........3.3V
GND........0V
CH_PD.....Power down pin. Connect to 3.3V for normal operation
Additionally to configure the module to accept AT commands you should connect the following pins to GND/VCC
GPIO0......VCC (HIGH)
GPIO2......VCC (HIGH)
GPIO15....GND (LOW)
AT Commands, examples available on our support forum here.
For suitable header pins, please see this item.
This low power transceiver module is based on the Maxim MAX485 IC to allow serial...
Low cost, small, low profile 21 key infrared remote control (HCIRRC0001). The remote uses the...
This relay module is designed for the ESP-01s ESP8266 module. It features a 6 pin IDC socket...
Low cost superheterodyne receiver and ASK transmitter. The transmitter consists of a single...
Cost effective, high-performance u-blox 6 based NEO-6 series of GPS modules, that brings the...
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n...
The PT2262 (Tx) transmitter module is designed to be used in conjunction with the PT2272-M4...
This amazingly priced wireless module allows any microcontroller to connect to a 802.11b/g/n...
Infrared receiver module uses a 1838 infrared receiver. This is a universal type, with steel,...
The nRF24L01 is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the...