GY-61 ADXL335 Triple Axis...
This is a very low cost break out module for the ADXL335 tripple axis accelerometer. This...
This is a panel-mountable temperature controller which features two bright, 3-digit 7-segment displays: a larger red display that shows the current temperature, and a smaller blue display that shows the setpoint (trigger temperature).
Also on the front panel are buttons to adjust various parameters, including operating mode, setpoint, hysteresis, and temperature limits. For more details, refer to the functional description.
The module is also supplied with a remote NTC temperature sensor which can be mounted up to 1m away from the module for remote sensing.
Operation wise the module can operate in one of two modes: heating and cooling.
This is a panel-mountable temperature controller which features two bright, 3-digit 7-segment displays: a larger red display that shows the current temperature, and a smaller blue display that shows the setpoint (trigger temperature).
Also on the front panel are buttons to adjust various parameters, including operating mode, setpoint, hysteresis, and temperature limits. For more details, refer to the functional description.
The module is also supplied with a remote NTC temperature sensor which can be mounted up to 1m away from the module for remote sensing.
Operation wise the module can operate in one of two modes: heating and cooling.
Specification
Product code: HCTHER0012
Supply voltage: 12V DC
Temperature Control Range: -55°C to 120°C
Resolution: 0.1°C (-9.9-99.9) / 1°C (other range)
Control resolution: 0.1°C
Display colour: red/blue
Sensor: NTC 10K Waterproof sensor
Relay contacts: Volt free normally open
Relay Contact Capacity: 10A @ 120VAC, 5A @ 240VAC, 10A @ 16VDC
Environmental requirements: -10 to 60°C , humidity 20% to 85%RH
Dimensions (module): 79.3mm * 43.2mm * 26.8mm
Mounting hole size 73mm * 40mm
Sensor type: NTC 10K
Sensor wire: 1 metre
Functional Description
Connection Example
Dimensions
This is a very low cost break out module for the ADXL335 tripple axis accelerometer. This...
The TSL2561 (HCARDU0102) Luminosity sensor module is a light to digital interface module. The...
The VL53L0X (HCMODU0127) is a new generation Time-of-Flight (ToF) laser-ranging module housed...
This module has been designed as an alternative to the PIR motion detectors commonly used in...
The BMP180 is the function compatible successor of the BMP085, a new generation of high...
- Main chip: LM393
- Working voltage: DC 5V
- Single channel signal output
-...
The W1209 is an incredibly low cost yet highly functional thermostat controller. With this...
Working voltage: 5V
Circle of Pulses: 20
Product Code: HCMODU0063
Diagrams,...
This 16 key capacitive touch keypad is based on the TTP229 capacitive sensor with accurate...
This module (HCMODU0099) is a breakout board for the Texas Instruments ADS1015 ADC. This...
Compatible with DS18B20. Please note that this sensor does not support parasitic mode.
...A very low cost module incorporating with a very high precision 24 ADC and differential high...
LD2410C is a high-sensitivity 24GHz human presence status sensing module developed by Hi-link....