This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour being black on a white backlit background.
For interfacing via a microcontroller the display uses an ST7567 serial controller consisting of a single clock and data pin for communication plus chip select and data/command pins for control. These pins plus power and reset are all available via a soldered 8 pin 0.1” header.
This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour being black on a white backlit background.
For interfacing via a microcontroller the display uses an ST7567 serial controller consisting of a single clock and data pin for communication plus chip select and data/command pins for control. These pins plus power and reset are all available via a soldered 8 pin 0.1” header.
For Arduino users this module is supported by our HCDisplay library. See bottom of this post for more information.
NOTES:
This is a 3.3V display. If using with a 5V microcontroller level shifters must be used.
Specification:
Product code: HCMODU0246
Supply voltage: 3.3V
Supply current (Backlight on): 11mA
Supply current (Backlight off): <1mA
Screen size: 1.8”
Display controller: ST7567
Interface: Serial SPI (clock, data, chip select, data/command select, reset)
Interface header: 8 pin 0.1” SIL header
Outer LCD size: 44.5mm x 29mm
Module size: 47.5mm x 37mm
Arduino Example:
Example Sketch and Exclusive Library download available on our support forum here.
This 3.2" Colour TFT is an Arduino compatible shield that will plug directly into common types...
This the larger version of our 16x4 LCD display. Its 24 character by 4 line display has a very...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
This 8 digit seven segment display module (HCMODU0095) uses a TM6138 controller allowing full...
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....
These tiny 0.96 inch uOLED displays have a resolution of 128 x...
A flexible full colour RGB LED light strip (HCOPTO0028). Each LED within the strip can be...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a...
This 2.4” LCD monochrome ultra-low power graphical display has a resolution of 128x64 pixels...
This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the...
A break-out board for an integrated RGB LED module. The module has 3 separate LED's (Red,...
A 2.4" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...
This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour being black on a white backlit background.
For interfacing via a microcontroller the display uses an ST7567 serial controller consisting of a single clock and data pin for communication plus chip select and data/command pins for control. These pins plus power and reset are all available via a soldered 8 pin 0.1” header.
