MAX7219 8 digit 7-Segment Module

£1.99
VAT included

This 8 digit seven segment display module (HCMODU0260) is based upon the Maxim MAX7219 LED display driver. The module uses two standard 4 digit seven segment displays to display a total of 8 digits in RED with decimal point. A convenient input and output header allows additional modules to be daisy-chained and controlled with just just 3 digital IO pins. For panel mounting, the module has 4 mounting holes.

The Maxim MAX7219 driver allows for each segment of up to 8 digits (with decimal point) to be controlled individually from a serial interface. An 8x8 static ram area stores each digit and multiplexing the display is handled automatically.

Quantity

This 8 digit seven segment display module (HCMODU0260) is based upon the Maxim MAX7219 LED display driver. The module uses two standard 4 digit seven segment displays to display a total of 8 digits in RED with decimal point. A convenient input and output header allows additional modules to be daisy-chained and controlled with just just 3 digital IO pins. For panel mounting, the module has 4 mounting holes.

The Maxim MAX7219 driver allows for each segment of up to 8 digits (with decimal point) to be controlled individually from a serial interface. An 8x8 static ram area stores each digit and multiplexing the display is handled automatically.

If you plan to use this module with an Arduino board we have written an exclusive library (HCMAX7219) than allows you to effortlessly display and scroll alphanumeric characters across one or more modules. This can be downloaded from the software section of our support forum here:

viewforum.php?f=58


The module is supplied with unsoldered 1x 4 way right angle and 1x way straight pin headers.


HOBBY COMPONENTS NOTES:

PLEASE NOTE WHEN CONNECTING MULTIPLE MODULES: The modules are fitted with a reverse polarity protection diode in series with the 5V (VCC) supply. This has the effect of reducing the voltage on the VCC output pin relative to the voltage applied to its VCC input pin. Therefore when daisy-chaining multiple modules you should either supply 5V to each module's VCC input pin separately, or remove the diode (D1) on each additional module.


Specification

Model number:		HCMODU0160
Driver:			Maxim MAX7921
Voltage:			4.0 - 5.5V
Max current:		180mA (all LEDs on)
Min current:		<0.5mA (shutdown mode)
Length:			82.3mm
Width:			15mm
Height:			11.5mm (approx)
Display length:		61mm
Display width:		14.3mm







Image


Image

Example Arduino code, library and datasheet available on our support forum here.

HCMODU0260
4 Items

Specific References

16 other products in the category