0.96" I2C / IIC OLED module
These tiny 0.96 inch uOLED displays have a resolution of 128 x 64 pixels and use a standard I2C serial interface for communication (default address = 0x3C). Based on the SSD1306 controller, the module is available in both white pixel colours. Pre-written libraries for Arduino are freely available including our own HCDisplay library for Arduino compatible development boards.
These tiny 0.96 inch uOLED displays have a resolution of 128 x 64 pixels and use a standard I2C serial interface for communication (default address = 0x3C). Based on the SSD1306 controller, the module is available in both white pixel colours. Pre-written libraries for Arduino are freely available including our own HCDisplay library for Arduino compatible development boards.
Module size: 27.3*27.8mm
High pixel density
Resolution: 128X64
Super wide viewing angle: more than 160°
Ultra-low power consumption: normal display 0.06W (far below the TFT display)
Industrial grade: Operating temperature range -30 C ~ 70 C
Ultra-small size: (length) 27.8MM * (W) 27.3MM * (thickness) 4.3MM
I2C address can be changed by moving soldered resistor on the rear of the board allowing for 2 displays to share the same I2C bus.
OLED screen, internal drive chip: SSD1306
Pixel Colour: White (HCMODU0164)
1....GND: Power ground
2....VCC: 3.3V power supply
3....SCL: I2C Clock
4....SDA: I2C Data
Arduino Example:
Example Arduino Sketch and EXCLUSIVE library available on our support forum here.
Specific References
16 other products in the category
3.2 inch Colour TFT Module...
A 3.2" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...
- Currently Out of Stock
Low Power 2.4 inch 128x64...
This 2.4” LCD monochrome ultra-low power graphical display has a resolution of 128x64 pixels...
mLink WS2812 RGB LED...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
3.2 inch Colour TFT Arduino...
This 3.2" Colour TFT is an Arduino compatible shield that will plug directly into common types...
- Currently Out of Stock
1.3" SH1106 uOLED Display...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
RAMPS compatible LCD...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
SSD1306 128x64 Pixel uOLED...
These tiny 0.96 inch uOLED displays have a resolution of 128 x...
3-Color RGB SMD LED Module
- 3-color LED Module
- With red, green and blue output
- Great for DIY project
8 x 8 LED Dot Matrix Module...
This 8x8 dot matrix LED (red) module is ideally suited for use with various microcontrollers...
2.4 inch TFT Arduino...
This 2.4" Colour TFT is an Arduino compatible shield that will plug directly into common types...
- Currently Out of Stock
2.4 inch Colour TFT Module...
A 2.4" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...
Elec Freaks 3.2" Colour TFT...
This feature rich 262K colour TFT module (HCARDU0097) has a resolution 320 x 240 pixels (QVGA)...
- Currently Out of Stock