Low Power 2.4 inch 128x64 ST7565 Serial LCD Display

This 2.4” LCD monochrome ultra-low power graphical display has a resolution of 128x64 pixels and black pixel colour on a transflective background.

For interfacing via a microcontroller the display uses an ST7565 serial controller consisting of a single clock and data pin for communication plus chip select and data/command pins for control. These pins plus power and reset are all available via a soldered 8 pin 0.1” header.

This display is ideal for low power battery applications and when in use draws <1mA of current, meaning it is even possible to directly power it via a GPIO pin of most microcontrollers.

For Arduino users this module is supported by our HCDisplay library. See bottom of this post for more information.


NOTES:
The module uses a transflective display which is best used in well lit/outdoor conditions. It does not include a backlight therefore it is not recommended for use in low light environments.

This is a 3.3V display. If using with a 5V microcontroller level shifters must be used.


Specification:
Product code: HCMODU0245
Supply voltage: 3.3V
Supply current: <1mA
Screen size: 2.4”
Display controller: ST7565
Interface: Serial SPI (clock, data, chip select, data/command select, reset)
Interface header: 8 pin 0.1” SIL header
Outer LCD size: 50mm x 36.5mm
Module size: 53mm x 45mm



Arduino Example:

Example Sketch and Exclusive Library download available on our support forum here.