A 16 x 2 line alphanumeric character display. This LCD features a parallel interface supporting both 4 bit and 8 bit modes, a blue LED back-light, and a white transmissive font.
A 16 x 2 line alphanumeric character display. This LCD features a parallel interface supporting both 4 bit and 8 bit modes, a blue LED back-light, and a white transmissive font.
Features:
LCD display module with blue backlight.
Wide viewing angle and high contrast.
Can display 2-lines * 16-characters.
Small and light appearance, easy and convenient to use.
Specfications:
LCM type: Characters
Character type: 16 * 2
Screen size: 7.1 * 2.4cm
Character size: 3.55 * 5.95 mm
Driving voltage: 5V DC
Backlight: Blue
Working temperature: 0 - 50°C
|
Pinout |
|
|
LCD |
ARDUINO |
|
VSS |
GND |
|
VDD |
+5V |
|
VO |
+5V VIA POTENTIOMETER |
|
RS |
D12 |
|
RW |
GND |
|
E |
D11 |
|
D4 |
D5 |
|
D5 |
D4 |
|
D6 |
D3 |
|
D7 |
D2 |
|
A |
+5V |
|
K |
GND |
Sample Arduino code is available on our support forum here.
This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the...
This feature rich 262K colour TFT module (HCARDU0097) has a resolution 320 x 240 pixels (QVGA)...
This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour...
The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
A flexible full colour RGB LED light strip (HCOPTO0028). Each LED within the strip can be...
This 16 character by 2 line display has a very clear and high contrast white text upon a blue...
This 66mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
This 8 digit seven segment display module (HCMODU0095) uses a TM6138 controller allowing full...
This 2.4” LCD monochrome ultra-low power graphical display has a resolution of 128x64 pixels...
The Wemos/Lolin OLED module is a tiny 128x64 pixel low power...
This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
A 16 x 2 line alphanumeric character display. This LCD features a parallel interface supporting both 4 bit and 8 bit modes, a blue LED back-light, and a white transmissive font.
