mLink WS2812 RGB LED...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a circular serial configuration. Each LED has seperatly controllable red, green, and blue, elements which can be individually set to one of 256 different intensity settings, allowing over 16 million colour variations. The module also has power and data connections at both ends of...
This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a circular serial configuration. Each LED has seperatly controllable red, green, and blue, elements which can be individually set to one of 256 different intensity settings, allowing over 16 million colour variations. The module also has power and data connections at both ends of the chain so that multiple modules can be connected together whilst still only requiring one digital pin to drive them.
What's more, to make controlling these LED's from an Arduino as simple as possible we have written our own exclusive library what will handle all the complicated bits. See bottom of this post or our blog for more information on this library and requirements.
Model number: HCMODU0128
Supply voltage: 4 to 7V (5V recommended)
LEDs per ring: 24
Max module current: 750mA (approx)
Module diameter: 66mm
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
This 8x8 dot matrix LED (red) module is ideally suited for use with various microcontrollers...
This 45mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
A break-out board for an integrated RGB LED module. The module has 3 separate LED's (Red,...
This the larger version of our 16x4 LCD display. Its 24 character by 4 line display has a very...
The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...
Red and green (common anode) 24 Pin 8x8 Dot Matrix Module
Please note that a current...
- 3-color LED Module
- With red, green and blue output
- Great for DIY project
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...