The 12864B Graphic LCD module is a 128 x 64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display....
The 12864B Graphic LCD module is a 128 x 64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display. No potentiometer is required to set the contrast as this is pre set by the factory to optimum level.
1)Encapsulation:COB(Chip-on-Board)
2)Display Format:128x64 dots
3)Display Type:STN, Transflective, Positive, Blue
4)Controller:ST7920 or equivalent controller
5)Interface:8-bit parallel interface or serial SPI modes
6)Backlight:Blue/Bottom light
7)Viewing Direction:6 O’clock
8)Driving Scheme:1/64 Duty Cycle, 1/9 Bias
9)Power Supply Voltage:5.0 V
10)VLCD Adjustable For Best Contrast:9.0 V (VOP.)
11)Operation temperature:-20°C to +70°C
12)Storage temperature :-30°C to +80°C
Further information is available on our support forum here.
A 3.2" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...
The 2004 SmartLCD module is a serially controlled 4 line by 20 character alphanumeric LCD...
This 66mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
These tiny 0.96 inch uOLED displays have a resolution of 128 x...
This 2.4" Colour TFT is an Arduino compatible shield that will plug directly into common types...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a...
This 3-colour LED module has 3 separate LED inputs (Red, Green and Blue) which can be...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....
This 8x8 serial dot matrix LED module (HCOPTO0014) allows you to experiment with dot matrix...
A bright 8x8 RGB led matrix display allowing for a full range of colours to be displayed. The...
The 12864B Graphic LCD module is a 128 x 64 pixel LCD display with a blue backlight and white foreground. The display is fully programmable and can display a combination of both graphics and text. It can operate in both parallel and serial (SPI) modes which can be configured by the external pin PSB. In SPI mode only 3 data pins are required to drive this display....
