Red and green (common anode) 24 Pin 8x8 Dot Matrix Module
Please note that a current limiting resistor must be used.
Product Code: HCOPTO0044
Pin information vailable on our support forum.
Red and green (common anode) 24 Pin 8x8 Dot Matrix Module
Please note that a current limiting resistor must be used.
Product Code: HCOPTO0044
Pin information vailable on our support forum.
This 66mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
This 16 character by 2 line display has a very clear and high contrast white text upon a blue...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
This feature rich 262K colour TFT module (HCARDU0083) has a resolution 320 x 240 pixels (QVGA)...
This 8x8 serial dot matrix LED module (HCOPTO0014) allows you to experiment with dot matrix...
This 45mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
This 3.2" Colour TFT is an Arduino compatible shield that will plug directly into common types...
These tiny 0.96 inch uOLED displays have a resolution of 128 x...
The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric...
The 12864B Graphic LCD module is a 128 x 64 pixel LCD display with a blue backlight and white...
Red and green (common anode) 24 Pin 8x8 Dot Matrix Module
Please note that a current limiting resistor must be used.
Product Code: HCOPTO0044
Pin information vailable on our support forum.
