0.9" 128 x 32 Serial I2C...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
The 2004 parallel LCD module (HCMODU0039) is the larger version of our popular 1602 modules (HCMODU0013 & HCMODU0038). The lager screen size allows for up to 4 lines of 20 character text to be displayed. Characters are displayed in white with a blue backlight in exceptionally clear contrast (set externally). Interface to the module ca...
The 2004 parallel LCD module (HCMODU0039) is the larger version of our popular 1602 modules (HCMODU0013 & HCMODU0038). The lager screen size allows for up to 4 lines of 20 character text to be displayed. Characters are displayed in white with a blue backlight in exceptionally clear contrast (set externally). Interface to the module can be made via an 8 bit parallel bus, or to save on digital I/O, the module can be configured to use a 4 bit bus. This module is also fully compatible with the standard Arduino LiquidCrystal library and so if using with the Arduino development environment, requires no additional libraries to work.
Please note that the attached picture demonstrates the module in operation and that the module does not come supplied with header pins.
Specification:
HD44780 / KS0066 IC
20 Characters * 4 Lines
Character LCD module
White Character
Blue Backlight
5V Logic compatible
Sketchm pinout and dimensions available after purchase.
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
The 2004 SmartLCD module is a serially controlled 4 line by 20 character alphanumeric LCD...
A bright 8x8 RGB led matrix display allowing for a full range of colours to be displayed. The...
- 3-color LED Module
- With red, green and blue output
- Great for DIY project
This 3.2" Colour TFT is an Arduino compatible shield that will plug directly into common types...
This 45mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
Red and green (common anode) 24 Pin 8x8 Dot Matrix Module
Please note that a current...
A 16 x 2 line alphanumeric character display. This LCD features a parallel interface...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....
This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the...
This 2.4" Colour TFT is an Arduino compatible shield that will plug directly into common types...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric LCD...