Our phone lines are currently down due to issues causing during the recent flooding. If you need to contact us please email sales@hobbycomponents.com
This 3-colour LED module has 3 separate LED inputs (Red, Green and Blue) which can be individually driven by applying a voltage to the appropriate module pin.
PINOUT
PIN 1: RED LED +Ve
PIN 2: GREEN LED +Ve
PIN 3: BLUE LED +Ve
PIN 4: GND
This 3-colour LED module has 3 separate LED inputs (Red, Green and Blue) which can be individually driven by applying a voltage to the appropriate module pin.
PINOUT
PIN 1: RED LED +Ve
PIN 2: GREEN LED +Ve
PIN 3: BLUE LED +Ve
PIN 4: GND
Example Arduino Sketch availabe on our support forum.
This 8x8 serial dot matrix LED module (HCOPTO0014) allows you to experiment with dot matrix...
These tiny 0.96 inch uOLED displays have a resolution of 128 x...
A 3.2" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...
This 2.4" Colour TFT is an Arduino compatible shield that will plug directly into common types...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the...
This feature rich 262K colour TFT module (HCARDU0097) has a resolution 320 x 240 pixels (QVGA)...
This 8x8 dot matrix LED (red) module is ideally suited for use with various microcontrollers...
The 2004 SmartLCD module is a serially controlled 4 line by 20 character alphanumeric LCD...
A break-out board for an integrated RGB LED module. The module has 3 separate LED's (Red,...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
This 8 digit seven segment display module (HCMODU0095) uses a TM6138 controller allowing full...
This 3-colour LED module has 3 separate LED inputs (Red, Green and Blue) which can be individually driven by applying a voltage to the appropriate module pin.
PINOUT
PIN 1: RED LED +Ve
PIN 2: GREEN LED +Ve
PIN 3: BLUE LED +Ve
PIN 4: GND
