Hobby Components SmartLCD...
The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...
Our phone lines are currently down due to issues causing during the recent flooding. If you need to contact us please email sales@hobbycomponents.com
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard serial I2C interface (address = 0x3C) for communication. Based on the SSD1306 controller, the module is available in both white and blue pixel colours. By making use of OLED screen technology these displays are self illuminated and therefore require no back light. When compared to standard LCD and TFT...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard serial I2C interface (address = 0x3C) for communication. Based on the SSD1306 controller, the module is available in both white and blue pixel colours. By making use of OLED screen technology these displays are self illuminated and therefore require no back light. When compared to standard LCD and TFT technology they have significantly less power consumption and a significantly clearer display. If using with an Arduino board they are also compatible with our own HCOLED graphic library (see viewtopic.php?f=58&t=1817)
Product code: HCMODU0118 (white) HCMODU0119 (blue)
Module size: 38 x 12mm
High pixel density
Resolution: 128 x 32
Ultra-low power consumption: normal display 0.06W (far below the TFT display)
Wide supply range: DC 3V-5V (without any changes, directly compatible with common 3.3V and 5V power supply system)
Industrial grade: Operating temperature range -30 C ~ 70 C
5V tolerant interface.
OLED screen, internal drive chip: SSD1306
1....GND: Power ground
2....VCC: 3.3V or 5V power supply
3....SCL: I2C Clock
4....SDA: I2C Data
The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...
This 3-colour LED module has 3 separate LED inputs (Red, Green and Blue) which can be...
This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
A flexible full colour RGB LED light strip (HCOPTO0028). Each LED within the strip can be...
A 2.4" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...
A bright 8x8 RGB led matrix display allowing for a full range of colours to be displayed. The...
This 16 character by 2 line display has a very clear and high contrast white text upon a blue...
This feature rich 262K colour TFT module (HCARDU0097) has a resolution 320 x 240 pixels (QVGA)...
This feature rich 262K colour TFT module (HCARDU0083) has a resolution 320 x 240 pixels (QVGA)...
The 2004 parallel LCD module (HCMODU0039) is the larger version of our popular 1602 modules...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...