ADS1115 I2C 16Bit ADC Module
This module (HCMODU0098) is a breakout board for the Texas Instruments ADS1115 ADC. This...
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. It has a 12 bit reolution providing temperature readings from 0oC to 1024oC (max temperature...
This temperature sensor and module makes use of the Maxim MAX6675 K-Thermocouple to digital converter IC to provide a microcontroller compatible digital serial interface (SPI compatible) to provide accurate temperature compensated measurement of the supplied K-Type thermocouple sensor. It has a 12 bit reolution providing temperature readings from 0oC to 1024oC (max temperature of supplied sensor is 450oC) with a resolution of 0.25oC. Screw terminals allow for connection to the thermocouples spade connectors and a 5 pin standard 0.1" header provides an interface to a microcontroller such as an Arduino development board.
Supplied thermocouple sensor has a diameter of 4.5mm with a 6mm threaded mounting bolt. Total length of sensor including cable and spade connectors is ~50cm.
Specifications:
Thermocouple temperature range: 0 to 450oC
Module sensor temperature range (oC): 0 to 1024
Temperature resolution (oc): 0.25
Module supply voltage: 3 to 5.5V
Module current: 50mA
Module interface: Serial (SO, SCK, CS) 16 bit SPI compatible.
Termocouple accuracy (0-700oC): 8 LSBs
Termocouple disconnect detection.
This module (HCMODU0098) is a breakout board for the Texas Instruments ADS1115 ADC. This...
A very low cost module incorporating with a very high precision 24 ADC and differential high...
This water sensor is designed for water detection and can be widely used in sensing rainfall...
- Photosensitive diode
- Working power: + 5V
- Working current: < 10mA
-...
A breakout board for the TCS320 colour sensor which also includes white LEDs for reflective...
- Main chip: LM393
- Working voltage: DC 5V
- Single channel signal output
-...
This module (HCMODU0099) is a breakout board for the Texas Instruments ADS1015 ADC. This...
The BMP180 is the function compatible successor of the BMP085, a new generation of high...
This sensor accepts a GND and +5V supply, and has a single digital output which goes low (GND)...
Infrared receiver module uses a 1838 infrared receiver. This is a universal type, with steel,...
A resistive strain gauge sensor with a 350 ohm nominal resistance which varies when a force is...
The MAX471 module (HCSENS0041) is a complete, bidirectional, highside current-sense amplifier...