Best sellers

  • PLA Filament for 3D...

    £12.49

    PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.

    Out-of-Stock
  • PLA Filament for 3D...

    £12.49

    PLA, Poly Lactic Acid is probably the best choice when you first start 3D printing. It is refined from corn and grain, and as a biodegradable material, it can be degraded which means it's 100% environmentally friendly. This hard material has excellent strength and stiffness.

    In-Stock!
  • High quality 24V / 40W...

    £2.49

    A 40W heater cartridge suitable for 3D printers (e.g. Reprap Mendel Prusa) with a 24V supply. Heater cartridge is made from stainless steel and has 1M length of silicone insulated cable.

    In-Stock!
  • SN74HC377N Flip-Flop

    £1.08

    The SN74HC377N is an octal positive-edge-triggered D-type Flip-flop with clock enable. It is similar to the HC273 devices, but features a latched clock-enable (CLKEN\) input instead of a common clear. Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse, if CLKEN\ is low. Clock triggering occurs...

    In-Stock!
  • SN74HC139N - Decoder /...

    £1.08

    The SN74HC139N is a 2-to-4 dual Decoder/Demultiplexer designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay time of these decoders and the enable...

    In-Stock!
  • DC To DC 5A Step Up Boost...

    £4.58

    A high power DC - DC step up power supply module capable of supplying currents up to 5.5A. It has a wide input/output operating range of 10.5V to 32V input and 12V to 34V output. The module includes two large heat-sinks to help dissipate heat when used at its upper operating range. Output voltage is...

    In-Stock!
  • Butane Gas Powered...

    £9.16

    A convenient gas-powered soldering iron, offering up to 100 minutes of usage once filled and a heat setting reaching a maximum of 400 degrees. This handy iron can be utilised for a wide range of jobs.

    Specification

    Temperature Range: 210~400C

    Capacity: 12ml (Butane Gas Only)

    Operating Time: up to 100 mins at mid setting

    Dimensions: 145 x 35 x 20mm (14.5 x 3.5 x 2cm)

    Weight: 50g (when gas filled)

    In-Stock!
  • Mega Experimental Kit -...

    £18.33

    This kit comprises a clear acrylic platform, which is excellent for keeping your Mega, LCD and Breadboard in place whilst you work on it. A 830 point breadboard, bundle of 65 jumper cables in assorted sizes and colours and a Hobby Components Mega development board. Please note that LCD's can be purchased separately.

    The platform has mounting holes for the mega and comes with relevant screws and mounting pads for the underside. You then simply peel off the backing of your breadboard and fix it in place.

    Platform measures approximately 19.5 x 11.3cm

    Kit contents
    Acrylic Platform
    10 x Screws
    4 x Gel Pads
    Hobby Components Mega and USB cable
    830 Point Breadboard (with self adhesive backing)
    Bundle of 65 jumper cables in assorted sizes and colours

    Product Code: HCPROT0099

    The platform can be purchased as a standalone product, the code for this is HCPROT0098.

    In-Stock!
  • 4x4x4 V2 LED Cube Kit (Green)

    £9.99

    LED light cubes are a hugely popular and fun project and with this kit you will have all the parts to build your very own 64 LED cube. The kit has been specifically designed to be easy to build and includes only through-hole components so that even someone with basic soldering skills, a soldering iron and a few simple tools can build it. It comes pre-flashed with 13 animations so is ready to go as soon as its all been soldered together

    For Arduino users this kit is also Arduino compatible and together with our free Arduino library you can write and upload your own cube animations (requires the Arduino IDE and a USB to serial adapter to upload sketches).

    In-Stock!
  • 4x4x4 V2 LED Cube Kit (Pink)

    £9.99

    LED light cubes are a hugely popular and fun project and with this kit you will have all the parts to build your very own 64 LED cube. The kit has been specifically designed to be easy to build and includes only through-hole components so that even someone with basic soldering skills, a soldering iron and a few simple tools can build it. It comes pre-flashed with 13 animations so is ready to go as soon as its all been soldered together

    For Arduino users this kit is also Arduino compatible and together with our free Arduino library you can write and upload your own cube animations (requires the Arduino IDE and a USB to serial adapter to upload sketches).

    In-Stock!
  • mLink DHT22 Temperature and...

    £6.24

    The mLink DHT22 sensor is a serial (I2C/IIC) temperature and humidity sensor module. It adds the ability of your microcontoller/Arduino to measure temperature (in oC) and relative humidity (%RH) to 1 decimal place using only its I2C interface. It is compatible with other mLink or standard I2C modules allowing you to daisy-chain several different types of modules together using only the two I2C pins of your microcontroller.

    For Arduino users you can use the mLink library (see below) to control any type of mLink module. Only one single instance of the library is needed to control multiple types of mLink modules resulting in very little resources overhead and therefore making it great for Arduinos with small amounts of memory and pin counts.

    In-Stock!
  • mLink RGBW LED Controller...

    £3.33

    The mLink RGBW LED controller is a serial I2C module designed to allow a microcontroller such as an Arduino to control common types of RGB (red-green-blue) and RGBW (red-green-blue-white) LED light strips. The module has screw terminals for connecting the light strips power supply and its +Ve, -red, -green, -blue, and optionally -white connections. It is capable of controlling 5V, 12V, & 24V LED strips that require a +Ve supply with -ve RGB(W) control inputs at up to a total of 2A per channel.

    When connected to a microcontrollers I2C interface each LED output can be controlled independently with up two 256 different levels of brightness allowing for a combined RGB colour palette of over 16 million colours. Additionally, either predefined or user defined RGB colour cycling modes can be selected which can run independently of the microcontroller.

    For Arduino users you can use the mLink library (see below for library and examples) to control any type of mLink module. Only one single instance of the library is needed to control multiple types of mLink modules resulting in very little resources overhead and therefore making it great for Arduinos with small amounts of memory and pin counts.

    In-Stock!