60mm 3 colour RGB Dot...
A bright 8x8 RGB led matrix display allowing for a full range of colours to be displayed. The...
- Currently Out of Stock
This 3.2" Colour TFT is an Arduino compatible shield that will plug directly into common types of Arduinos, including Uno, Leonardo, and Mega. It includes level shifters so no additional adaptor board is required for connecting to 5V Arduinos.
This 3.2" Colour TFT is an Arduino compatible shield that will plug directly into common types of Arduinos, including Uno, Leonardo, and Mega. It includes level shifters so no additional adaptor board is required for connecting to 5V Arduinos. The shield also includes a resistive touch screen sensor allowing your application to include touch screen controls. If using with the above Arduino devices we have also written an Arduino library (HCDisplay) to help you develop your project with minimum time and effort.
Specification:
Product code: HCARDU0109 (HC8352B) / HCARDU0111 (ILI9327)
Display size: 3.2 inch
Resolution: 240X400
Colours: 65535
Display controller: HX8352B (HCARDU0109) / ILI9327 (HCARDU0111)
Operating voltage: 5V
Operating current: 150mA (max)
Touch screen type: resistive touchscreen
On board Micro SD slot, supports Micro SD / TF Card
Compatibility: As the SD card is connected to SPI pins of ICSP interface it is compatible with Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo
Touch Pen: length 9cm
A bright 8x8 RGB led matrix display allowing for a full range of colours to be displayed. The...
This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a...
This 2.4” LCD monochrome ultra-low power graphical display has a resolution of 128x64 pixels...
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....
This 8 digit seven segment display module (HCMODU0095) uses a TM6138 controller allowing full...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric LCD...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
- 3-color LED Module
- With red, green and blue output
- Great for DIY project
The SmartLCD backpack module is designed to be interfaced directly to the parallel interface...
This 3-colour LED module has 3 separate LED inputs (Red, Green and Blue) which can be...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
This 8x8 dot matrix LED (red) module is ideally suited for use with various microcontrollers...
Red and green (common anode) 24 Pin 8x8 Dot Matrix Module
Please note that a current...