8 x 8 LED Dot Matrix Module...
This 8x8 dot matrix LED (red) module is ideally suited for use with various microcontrollers...
This item is a 6 digit 7-segment LCD display module. It features large black LCD digits displayed against a white backlight resulting in a clear and easy to read display. Communication to the module is via a 5V serial interface requiring only 3 digital pins (CS, WR, Data). Additionally, this 6 digit display module also features a 3 state battery charge icon.
This item is a 6 digit 7-segment LCD display module. It features large black LCD digits displayed against a white backlight resulting in a clear and easy to read display. Communication to the module is via a 5V serial interface requiring only 3 digital pins (CS, WR, Data). Additionally, this 6 digit display module also features a 3 state battery charge icon.
For Arduino users we have also written an exclusive library (HCDisplay) which will help you develop your project with the minimum of effort. This library can be downloaded from the support section of our support forum here:
http://forum.hobbycomponents.com/viewto ... =58&t=2827
Hobby components notes: Although this module can display numbers up to 6 digits, for fractional numbers only the 3 right most digits are capable of displaying a decimal point.
Specification:
Product code: HCMODU0152
Display type: 6 digit 7-segment LCD
Backlight: White
Interface: 3 wire serial SPI
Driver: HT1621
Supply voltage: 4.7-5.2VDC
Supply current: 0.4mA without backlight, 4mA with backlight
Note: Screen in video below is the green backlit version (HCMODU0136).
This 8x8 dot matrix LED (red) module is ideally suited for use with various microcontrollers...
The 2004 parallel LCD module (HCMODU0039) is the larger version of our popular 1602 modules...
This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a...
A 3.2" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
This 66mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
This 3.2" Colour TFT is an Arduino compatible shield that will plug directly into common types...
This the larger version of our 16x4 LCD display. Its 24 character by 4 line display has a very...
This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the...
A bright 8x8 RGB led matrix display allowing for a full range of colours to be displayed. The...
This 45mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...