1.8 Inch 128x64 ST7567...
This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour...
This 8 digit seven segment display module (HCMODU0095) uses a TM6138 controller allowing full control of the display using just 3 digital pins on a microcontoller. In addition to the seven segment display there are 8 individually controllable 3mm LEDs and a keypad with 8 push buttons arranged in a single row. These can also be controlled through the TM6138 IC and so require no extra digital pins.
This 8 digit seven segment display module (HCMODU0095) uses a TM6138 controller allowing full control of the display using just 3 digital pins on a microcontoller. In addition to the seven segment display there are 8 individually controllable 3mm LEDs and a keypad with 8 push buttons arranged in a single row. These can also be controlled through the TM6138 IC and so require no extra digital pins. A standard 5 pin header provides easy interface to the module from your microcontroller.
Additionally if you plan to use this module with an Arduino development board we have created an exclusive library (HCTI6138) to make controlling the module as easy as possible. The library will provide full control over the seven segment display (providing the ability to display alphanumeric text), the 8 LEDs, and reading the state of the keypad. It is also capable of controlling multiple modules from one Arduino and is only limited by the number of spare pins and memory. The library can be downloaded from the software section of our support forum.
Product code: HCMODU0095
Supply Voltage: 5V
Controller: TM1638
Dimensions: 76mm x 50mm
Example: Driving the module from and Arduino with the HCTM1638 library
Example Arduino sketch, library and datasheet available on our support forum here.
This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour...
This 3-colour LED module has 3 separate LED inputs (Red, Green and Blue) which can be...
This 66mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric LCD...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
These tiny 0.96 inch uOLED displays have a resolution of 128 x...
This the larger version of our 16x4 LCD display. Its 24 character by 4 line display has a very...
This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a...
These tiny 0.96 inch uOLED displays have a resolution of 128 x...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
A 16 x 2 line alphanumeric character display. This LCD features a parallel interface...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
This 2.4" Colour TFT is an Arduino compatible shield that will plug directly into common types...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric...