0.9" 128 x 32 Serial I2C...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
- On sale!
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard serial I2C interface (address = 0x3C) for communication. Based on the SSD1306 controller, the module is available in both white and blue pixel colours. By making use of OLED screen technology these displays are self illuminated and therefore require no back light. When compared to standard LCD and TFT...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard serial I2C interface (address = 0x3C) for communication. Based on the SSD1306 controller, the module is available in both white and blue pixel colours. By making use of OLED screen technology these displays are self illuminated and therefore require no back light. When compared to standard LCD and TFT technology they have significantly less power consumption and a significantly clearer display. If using with an Arduino board they are also compatible with our own HCOLED graphic library (see viewtopic.php?f=58&t=1817)
Product code: HCMODU0118 (white) HCMODU0119 (blue)
Module size: 38 x 12mm
High pixel density
Resolution: 128 x 32
Ultra-low power consumption: normal display 0.06W (far below the TFT display)
Wide supply range: DC 3V-5V (without any changes, directly compatible with common 3.3V and 5V power supply system)
Industrial grade: Operating temperature range -30 C ~ 70 C
5V tolerant interface.
OLED screen, internal drive chip: SSD1306
1....GND: Power ground
2....VCC: 3.3V or 5V power supply
3....SCL: I2C Clock
4....SDA: I2C Data
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
Red and green (common anode) 24 Pin 8x8 Dot Matrix Module
Please note that a current...
This 66mm module contains a strip of 24 individually controllable RGB LEDs arranged in a...
This item is a 6 digit 7-segment LCD display module. It features large black LCD digits...
These tiny 0.96 inch uOLED displays have a resolution of 128 x...
This 3.2" Colour TFT is an Arduino compatible shield that will plug directly into common types...
- 3-color LED Module
- With red, green and blue output
- Great for DIY project
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
A bright 8x8 RGB led matrix display allowing for a full range of colours to be displayed. The...
The 1602 SmartLCD module is a serially controlled 2 line by 16 character alphanumeric LCD...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
A flexible full colour RGB LED light strip (HCOPTO0028). Each LED within the strip can be...
This module contains a strip of 8 individually controllable RGB LEDs arranged in a serial...
A 2.4" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...
The SmartLCD Keypad Kit is an optional add-on for the Hobby Components SmartLCD (HCMODU0122)....