This item is a 6 digit 7-segment LCD display module. It features large black LCD digits displayed against a green backlight resulting in a clear and easy to read display. Communication to the module is via a 5V serial interface requiring only 3 digital pins (CS, WR, Data). Additionally, this 6 digit display module also features a 3 state battery charge icon.
This item is a 6 digit 7-segment LCD display module. It features large black LCD digits displayed against a green backlight resulting in a clear and easy to read display. Communication to the module is via a 5V serial interface requiring only 3 digital pins (CS, WR, Data). Additionally, this 6 digit display module also features a 3 state battery charge icon. 
For Arduino users we have also written an exclusive library (HCDisplay) which will help you develop your project with the minimum of effort. This library can be downloaded from the support section of our support forum here:
http://forum.hobbycomponents.com/viewto ... =58&t=2827
Hobby components notes: Although this module can display numbers up to 6 digits, for fractional numbers only the 3 right most digits are capable of displaying a decimal point.
Specification:
Product code: HCMODU0136
Display type: 6 digit 7-segment LCD
Backlight: Green
Interface: 3 wire serial SPI
Driver: HT1621
Supply voltage: 4.7-5.2VDC
Supply current: 0.4mA without backlight, 4mA with backlight
A 2.4" colour TFT display module compatible with 3.3V microcontrollers such as the Arduino...
A flexible full colour RGB LED light strip (HCOPTO0028). Each LED within the strip can be...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
This serial LED dot-matrix module consists of an 8x8 grid of red LEDs. It is based on the...
This 45mm module contains a strip of 16 individually controllable RGB LEDs arranged in a...
A larger 1.3" version of our ultra low power tiny uOLED display module. This display has the...
The 2004 SmartLCD module is a serially controlled 4 line by 20 character alphanumeric LCD...
This controller is designed to be used with a RepRap RAMPS interface board such as our RAMPS...
These tiny 0.96 inch uOLED displays have a resolution of 128 x...
These tiny 0.9 inch uOLED displays have a resolution of 128 x 32 pixels and use a standard...
The mLink WS2812 LED driver is a serial (I2C) module intended for driving WS2812 5V RGB LEDs....
This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour...
This 8x8 dot matrix LED (red) module is ideally suited for use with various microcontrollers...
This 2.4" Colour TFT is an Arduino compatible shield that will plug directly into common types...
This item is a 6 digit 7-segment LCD display module. It features large black LCD digits displayed against a green backlight resulting in a clear and easy to read display. Communication to the module is via a 5V serial interface requiring only 3 digital pins (CS, WR, Data). Additionally, this 6 digit display module also features a 3 state battery charge icon.
