1.8 Inch 128x64 ST7565 Serial LCD Display With Backlight

£3.99
VAT included

This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour being black on a white backlit background.

For interfacing via a microcontroller the display uses an ST7565 serial controller consisting of a single clock and data pin for communication plus chip select and data/command pins for control. These pins plus power and reset are all available via a soldered 8 pin 0.1” header.

Quantity

This 1.8” LCD monochrome graphical display has a resolution of 128x64 pixels with pixel colour being black on a white backlit background.

For interfacing via a microcontroller the display uses an ST7565 serial controller consisting of a single clock and data pin for communication plus chip select and data/command pins for control. These pins plus power and reset are all available via a soldered 8 pin 0.1” header.

For Arduino users this module is supported by our HCDisplay library. See bottom of this post for more information.


NOTES:

This is a 3.3V display. If using with a 5V microcontroller level shifters must be used.


Specification:
Product code: HCMODU0246
Supply voltage: 3.3V
Supply current (Backlight on): 11mA
Supply current (Backlight off): <1mA
Screen size: 1.8”
Display controller: ST7565
Interface: Serial SPI (clock, data, chip select, data/command select, reset)
Interface header: 8 pin 0.1” SIL header
Outer LCD size: 44.5mm x 29mm
Module size: 47.5mm x 37mm



Arduino Example:


Image

Example Sketch and Exclusive Library download available on our support forum here.

HCMODU0246
10 Items

Specific References

16 other products in the category